Table of Contents 1. Purpose 2. Scope 3. System Description4. Definitions 5. References 6. Abbreviations 7. Responsibilities 8. Resources 9. Procedure 10. Health Safety and Environment11. Quality Assurance and Quality Control 12. Attachments1. PURPOSE This Method Statement formalizes the requirements for the Installation of Cable Trays, Ladders, and Trunking System.
What is Crosshole Sonic Logging? Crosshole Sonic Logging (CSL) is carried out on drilled shafts/bored piles to inspect the structural integrity, and extent and location of defects, if any, by sending ultrasonic pulses through the concrete from one probe to another (probes located in parallel tubes). The CSL is carried out
What is a micropile? A micropile is a small-diameter (commonly less than 300 mm), drilled and grouted replacement pile that is typically reinforced which can either withstand axial or lateral loads or both of these. What we mean here by the term “replacement” pile is the installation by removal and
What is Method Statement for the Repair of Concrete? This method statement for the repair of concrete describes the details of rectification for most common construction defects of concrete structures right after the casting activity and formworks deshuttering such as concrete cracking (non-structural and structural cracks), honeycombs or spalling, pinholes
The method statement for anti-termite defines the procedure for the sequence of works for surface treatments and termite control after leveling/compaction of the filled soil and before polythene/damp proof membrane is laid, considering all the necessary safety and quality aspects of the work activities. What is the anti-termite treatment? Anti-termite
This method statement for false ceiling describes the details of the installation of suspended gypsum board and tile ceiling with the use of metal framings in the project. This also outlines the health and safety hazards involved and include the guide on how to do the process safely. What is a false
This method statement covers the activities involved in the fabrication, installation of the rebar in the project considering the quality and safety requirements. This method statement defines the activities of the rebar shop drawings and on-site activities and do not cover the rebar cut and bent fabrication works if any in
The method statement for ceramic floor tiles encompasses the preparation of the surfaces, mixing and applying the adhesive or mortar materials, laying and grouting of tiles, and cleaning/protection of the finished work. Floor tiles are typically manufactured materials such as ceramic, stone, vinyl, etc. which are laid upon an existing
Method statement of bored piles comprises of hole boring into the ground, installing steel reinforcement and casting with concrete to form a pile. Bored piles are constructed in the ground by boring in the circular shape of designed diameters to transfer load from the superstructure into the ground through friction and end bearing.