Purpose This method statement for MICC cables describes the installation as per project specifications, regulations in a safe manner to an approved and controlled methodology. The Job Hazard analysis in the appendix identifies the hazards and the safe systems of work to be followed when conducting the activity. Scope TheContinue Reading
An air handling unit is also known as the AHU, is a collection of parts that are housed in huge, easily accessible boxes, also known as modules that keep the proper airflow requirements for purifying and regenerating the indoor air inside a building or other premises. They are typically erectedContinue Reading
What is air curtain? An air curtain (also known as an air door, air barrier, or air screen) is a fan-powered device that makes an air barrier invisible over the doorway, separating two distinct environments, while not restricting access for individuals or vehicles. The energy-savings air screen cuts the costsContinue Reading
1. Purpose The method statement for fiber optic cable defines the planning, site preparation, and installation of exterior underground fiber optic cables, fitting accessories, and utility structures. Installations will be located as shown on the approved construction drawings and as detailed in the applicable specifications. 2. Scope This method statementContinue Reading
What is Hvac-Calc 4.0? Hvac-Calc 4.0 – HVAC design software free download. You can calculate the heat loss of HVAC By HVAC-Calc Commercial 4.0. It is a single zone program for calculating heat gain and loss for commercial buildings and with various complex design features. You can just do calculationsContinue Reading
1. Description of Works This Method Statement for Irrigation defines the general procedure implemented for the installation of the irrigation systems as per project specifications, quality, health, safety, and environmental requirements. 1.1. Introduction This method statement for irrigation system shall be followed for the construction of any particular irrigation installationsContinue Reading
I. Description of Works The method statement for HDPE pipe installation defines the steps to be followed in order to ensure that pipelinewelding, laying, and associated works are performed as per project specifications, HSE, and quality requirements. HDPE pipes are commonly used for many different purposes including water supply forContinue Reading
The Method Statement For Central Battery System (CBS) Installation describes the sequential approach as outlined in the project contract requirements which ensures that safety, quality assurance, and quality control are implemented by the contractor. References This method statement is subject to the requirements as stated in the following regulatory &Continue Reading
This method statement for bus duct (fire rated) describes the installation activity to ensure that it complies with the project requirements, HSE, specifications, and standards. Scope The scope of this method statement covers the installation of the fire-rated bus duct which gives guidelines for the job execution in compliance withContinue Reading
The Method Statement for Water Heater Installation describes how the supply and installation of water heaters and related accessories should be done in a safe way as per HSE and project requirements.Likewise, all quality assurance and control activities are conducted in a systematic way, where works are inspected to ensureContinue Reading