Stepped footing is a footing with steps that are spaced around apart horizontally and vertically to achieve the appropriate width. When it comes to constructing a building or any structure, the foundation is an essential part of the construction process. A stable foundation ensures the safety and longevity of theContinue Reading
What is Concrete Formwork? Concrete formwork, or concrete shuttering, is a temporary or permanent mold or frame used to hold wet concrete in place until it sets and hardens, creating the desired shape and structure for a construction project. In this article, we will explore the different types of concreteContinue Reading
What is lean concrete in civil engineering? Lean concrete is a mix in which the cement content is less than the amount of liquid present in the strata. Lean concrete mix is the phrase used in the construction industry when less than 10% of the mix’s cement content actually exists.Continue Reading
What are Contraction Joints in Concrete Slabs? Contraction joints in concrete slabs are weakened planes generated by tooling, saw cuts, or mechanical devices, that are utilized to attract and conceal restraint-to-shortening cracks. Contraction joints are also known as control joints. Many concrete contractors don’t construct contraction joints in residential slabs-on-groundContinue Reading
Studs in concrete walls-are they necessary? Studs are a type of framing used to keep a structure in place. It’s most commonly found in walls composed of drywall or similar materials. Concrete walls, on the other hand, appear to be different. Concrete walls use reinforcing steel or rebars for strength andContinue Reading
Waterstop is a critical aspect that influences the engineering quality of expansion joints, deformation joints, and construction joints, and it’s exceedingly tough to fix if it’s faulty. As a result, the waterstop’s construction quality is a critical connection that influences the overall project’s quality. In this post, we looked atContinue Reading
The types of waterstops have their own set of benefits, uses, and drawbacks, resulting in a range of performance. Waterstop is a waterproofing material that is often used in concrete construction joints and deformation joints. Plastic waterstop, rubber waterstop, and metal waterstop are the three types of waterstop available. ToContinue Reading
This waterstop profiles selection guide will assist you in swiftly selecting the proper items to satisfy your project’s waterproof needs and save you time. Waterstop is essential for waterproofing a concrete structure, particularly joints, which are the weakest point and are prone to leakage of water or chemical substances. ToContinue Reading
Installing the waterstop in such a way that it produces a continuous waterproof diaphragm is a must. The installation of a waterstop system is important to its efficiency and effectiveness; most failures occur because adequate steps are not performed. Dumbbell and ribbed center-bulb waterstops should be positioned so that theContinue Reading
What is waterstop? A waterstop is a material inserted in concrete that has the sole aim of preventing water from passing through the joint. To put it another way, it’s not an elastomeric sealant applied to a joint’s exposed surface. Waterstops cannot prevent water vapor or capillary moisture potential fromContinue Reading